Case Taper Machinery
COMARME GEM X350 / X360 Case Taper Sealer
Semiautomatic self-dimensioning taping machine which seals with adhesive tape the upper and lower parts of uniform boxes.
GEM X350/X360 is expecially suitable for sealing tall, narrow boxes as four belts, two upper and two lower, horizontal and parallel to the work surface,are used for conveying.
The use of a single motor for driving the four conveyor belts simultaneously is totally innovative and patented, allowing smooth and even feeding of the boxes.
The speed of the upper and lower belts is in fact the same in mechanical terms.
The upper taping unit has a patented system which, by means of a pneumatic device, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed.
GEM X350/X360 is equipped with mechanical side arms.
The box is held on the work table with the bottom flaps folded and ready to be filled.
The taping machine, combined with conveyors at outfeed, represents an effective and economic packaging station.
– Roller Conveyors for Box Entrance and Exit
– Belts Switching Off Kit
– Legs with Casters
– RFC Kit
– Lower Closure Cover
– Wired Roll Holder Kit with Sensors
Case Sealer Machinery
Semiautomatic taping machine which seals with adhesive tape the upper and lower parts of fixed-format boxes with manual adjustment.
GEM520 is the ideal solution for sealing fixed-format boxes and, with the addition of two accessories (GEM 520 Linea), becomes a complete and convenient packing station.
The upper taping unit has a patented system which, by regulating a spring, enables the subsequent weight on the box to be preset and therefore any differences in height of the boxes to be absorbed.
The boxes are fed by lateral conveyor belts, driven by a single motor thus optimising even sliding of the boxes and ensuring perfect alignment of the upper and lower flaps which in turn guarantees perfect sealing.
Adjustment by means of handwheels is easy and fast, enabling use by non-specialist operatives.
– Caster wheels
– Bottom cover van
– Infeed & outfeed conveyors
– Filling station SRF model in infeed
– Three flaps closing device
– Double presser rollers for box stability
– Driving belts H30/H70 longer driving belts
– Pneumatic centering device in infeed